WRITE_COMMAND(0xAE); // Display Off
WRITE_COMMAND(0x15); // Column Address
WRITE_COMMAND(0x00); // Set
WRITE_COMMAND(0x5F); // Set
WRITE_COMMAND(0x75); // Row Addess
WRITE_COMMAND(0x00); // Set
WRITE_COMMAND(0x3F); // Set
WRITE_COMMAND(0x81); // Set Contrast for Color A
WRITE_COMMAND(0x48); // Set
WRITE_COMMAND(0x82); // Set Contrast for Color B
WRITE_COMMAND(0x2A); // Set
WRITE_COMMAND(0x83); // Set Contrast for Color C Now setting value is 15V, 100cd.
WRITE_COMMAND(0x68); // Set If you want to change
WRITE_COMMAND(0x87); // Master Current Control the OLED Brightnees.
WRITE_COMMAND(0x0F); // Set Pls see the Note 1)
WRITE_COMMAND(0xA0); // Set Re-map & Data Format
WRITE_COMMAND(0x70); // Set
WRITE_COMMAND(0xA1); // Set Display Start Line
WRITE_COMMAND(0x00); // Set
WRITE_COMMAND(0xA2); // Set off Set
WRITE_COMMAND(0x00); // Set
WRITE_COMMAND(0xA8); // Multiplex Ratio
WRITE_COMMAND(0x3F); // Set
WRITE_COMMAND(0xAD); // Master Configuration
WRITE_COMMAND(0x8F); // Set
WRITE_COMMAND(0xB1); // Adjust Driving period
WRITE_COMMAND(0x11); // Set
WRITE_COMMAND(0xB3); // Colock Divider Oscillator Frequency
WRITE_COMMAND(0xD0); // Set
WRITE_COMMAND(0xBB); // Pre_charge Voltage Setting
WRITE_COMMAND(0x0D); // Set
WRITE_COMMAND(0xBC); // Pre_charge Voltage Setting Now setting value is 15V, 100cd.
WRITE_COMMAND(0x0E); // Set If you want to change
WRITE_COMMAND(0xBD); // Pre_charge Voltage Setting the OLED Brightnees.
WRITE_COMMAND(0x0C); // Set Pls see the Note 1)
WRITE_COMMAND(0xBE); // Set VCOMH Level
WRITE_COMMAND(0x3F); // Set
WRITE_COMMAND(0xB9); // Enable Linear Gray Scale
WRITE_COMMAND(0xAF); // Display On
WRITE_COMMAND(0x15); //Set Column Address RAM
WRITE_COMMAND(0x00); //Dec->0
WRITE_COMMAND(0x5F); //Dec->95
WRITE_COMMAND(0x75); //Set Row RAM Address
WRITE_COMMAND(0x00); //Dec->0
WRITE_COMMAND(0x3F); //Dec->63